BROADREALM MQ-6100 DVB QAM Processor Agile Modulator combines DVB-S QPSK Input(or factory optional DVB-C QAM input), ASI TS input and output，SPI(LVDS) input, DS3 adaptor(Optional), and QAM (DVB-C) modulator into single 19 inch 1U chassis(ASI input and DVB-S QPSK input are of standard configuration). MQ-6100 is designed to receive ASI or SPI transport stream, or to demodulate DVB-S/C signal into TS, or to transcode DS3 data into TS, and then modulate the TS into DVB-C QAM agile channel of 8 or 6MHz bandwith between 48~860MHz. The QAM modulation constellation is among 16, 32, 64, 128 and 256. MQ-6100 also has the package stuffing function for low rate stream input. Each of QPSK, ASI, SPI(LVDS), and DS3 inputs can be loop-output through the ASI output and optional DS3 output. With Ethernet WEB control interface which is under development, PSI/SI of TS from any input port can be analyzed and remapped by the PC software. TS from ASI input can even be re-multiplexed with TS from one port among QPSK(or QAM), SPI(LVDS), and Ds3 inputs.

In general, MQ-6100 DVB QAM Processor Modulator is suitable to process signal from digital headend equipment(e.g. TS re-multiplexer), satellite, cable or SDH source for transmission of DVB-C QAM signal in HFC and MMDS networks.

• Fully comply with DVB-S / ETSI 300421 & DVB-C / ETSI
  300429 standard
• Embeded with Ethernet WEB management interface
  (under development)
• Fully meet with the requirements of professional
  digital TV headend
• Maximum four inputs in one unit: ASI, QPSK(or
  QAM), SPI, Ds3
• ASI and optional DS3 loop-out for any of four inputs
• TS Input code rate: 2Mbit/s~45Mbit/s(AnnexA, AnnexC)；
• QAM constellation: 16，32，64，128，256 adjustable
• QAM symbol rate: 1.5~7MB/S(8MHz) or 1.5~5.2MB/S (6MHz)；
• RF output frequency range: 48MHz~860MH(6 or 8MHz bandwith)
• User friendly operation interface through front panel LCD monitor
• Automatic power-off configuration memory
• Store up to 99 channel parameters
• 1U, 19" standard rack installation